• Ornaments for Utrecht's Domkerk and St John's Cathedral 2

    Finial

    As you may perhaps remember: I last year I carved ornaments a few times and even made some stonemasonry work for St. John's Cathedral in 's-Hertogenbosch. The blog posts can be found under the following headings: Stonemasonry work and ornaments for St. John's Cathedral, Finally another update! and Ornamental work for the Utrecht Dom Church and St. John's.

    I recently got a new batch of ornamental work in the yard again, including another identical finial block for the same buttress finial of St. John's Cathedral. The first block I carved in its entirety myself, including the stonemasonry parts.

    pallet with ornamental work in the yard of the sculptor's workshop

    The second block was precarved by stonemason Mike Slotboom from Slotboom Steenhouwers in Winterswijk and the ornamental work was done by my colleague Serge. The third block was carved by three young stonemasons from Slotboom Stonemasons, who have all done their terrific best, and I carved the ornaments again: the crockets.

    Together with my colleagues

    sculotor's workshop with many projects

    For larger projects, I work with my colleagues Stide Vos and Serge van Druten. We were all trained as restoration sculptors at our former employer's Beeldhouwerij Mooy in Amersfoort. There, we worked together for about 15 years, so we know each other really well and get along famously.

    Self-employed in the sculptor's workshop

    We've continued all three as independent restoration sculptors, but keep in contact regularly, because it is such an incredibly small world. For this branch, the carving of ornaments and statues in new stone for mainly churches and castles, there are now still three restoration sculptors working fulltime. To my knowledge. It has always been a small group and that's never been a lot larger; there are times when all the work seems to come all at once and times when we really do not have enough work to keep all of us going. That's why we do other work as well, such as autonomous sculptures, reliefs, bronze statues, house signs, repairs, burial monuments, work for other sculptors and much more.

    Recently, Jelle Steendam has come to work in the beeldhouwerij to help alleviate the pressure and increase his knowledge at the same time. So that makes four in the Netherlands. There are of course many other sculptors in stone and I also know a few other restoration sculptors, but I rarely encounter these within my own genre

    Dom Cathedral

    overview West Facade of South Chapel of Dom church Utrecht
    Wherever the numbers are the side crockets are to be replaced

    At this time we're mainly working together on sculptural- and ornamental work for the Utrecht Cathedral and the Eusebius Church in Arnhem. Serge and Stide in particular have made many tuffstone side crockets for the Dom cathedral already, but in between all of the other work I also managed to carve a few flowers in tuff myself. On the right is a picture of the three Gothic pointed arch facades, with a triangular frame above it. Along that frame, 12 crocket flowers are mounted, and with two and a half façade that makes 30 crocket flowers in all. One doesn't count, so we'll need to make 29. This is just a fraction of what you can find on this beautiful church.

    Gallery

    Snow

    It was cold in the sculptor's workshop, but it's beautiful, and we can dress to the occasion. As long as we can warm up again during breaks we'll be fine.

  • Year review of 2018

    Year review of 2018

    It seemed nice to sum up this year of sculpting in some words and pictures. Not in chronological order, because my work sometimes jumps from one thing to another, for often suddenly urgent commissions come in between. I like it that way too, I love things being a bit unpredictable! But only when there's not too much pressure on things.

    Finishing flying buttresses 4, 5, 6 and 7

    Last year I spent a long time making flying buttress figurines as well for the north side of St. Eusebius's Church in Arnhem. Early January that job was nearly done; I only had to make a Monk, a Bear, a man calling Noah, a Monkey and an Ark with animals out of new limestone. It was the last series of the four flying buttresses themed around Noah's Ark.

    Calamities and Repairs

    Amid heavy snowfall and storms, work went on as usual. I accounted for a severe frost period and just continued sawing. A part of the barn didn't feel the same way about it, and collapsed under the weight of a thick layer of wet snow. A few weeks later I narrowly escaped from a disaster, when in a torrential storm a sheet of asbestos was blown from the roof and landed right next to my finished flying buttress sculptures.

    Part of my repair work consists of patching up damaged statues. For instance I had to repair a Faun with a Pan Flute and a statue of Thomas Aquinas in my shop this year.

    Injury and recovery

    Something I've not reported on this blog is that I've been incapacitated for quite some time by injuries earlier this year. I hear you think it would surely have come about because of my job. I do have quite the productivity and it is rather physical work. And at times there can be some pressure to finish it all in time. But it wasn't anything like that. First it was an accident when I cut open my thumb deep on a party tent that threatened to blow away. Just three stitches and two weeks later I was back at work again.

    But it was not long before I was back home for some weeks. This time I had overstrained both my arms during removals (at temperatures around minus eight degrees Celsius). At least I now know how to recover from two tennis elbow quickly: not with all kinds of therapies, but by massaging the muscles in your forearm deeply for several times a day. This way, you'll relieve the tension from of the muscle and it will no longer pull so hard on your funny bone, let's put it this way. Learned on YouTube and experimentally tested myself.

    Own work: Pan in porphyry

    After all these flying buttress figurines, I started enthusiastically on my own project: a Pan in porphyry. I had presawn it machine and had just begun carving it, but in spite of all the good intentions, I had to put it aside because of other urent projects.

    block of porphyry for plaster image of Pan
    plaster sculpture of Pan with block of porphyry

    Ornamental works: Aachen, Utrecht, Den Bosch

    For all kinds of ornaments had arrived in the yard, which were to be made first. So this year I made finials and crockets for Aachen Cathedral, for the Cathedral of Utrecht, again for the Utrecht Dom, and for St John's Cathedral in Den Bosch, The Netherlands. Some of them in collaboration with my colleagues. There was stonemasonry work to do. There isnewspaper article was written about it and a video was made.

    Family Crests and griffins

    Then there were two sandstone family crests which I made in between other stuff, one with an edge and one without edge, and I have been modelling away on a set of mirrored griffins. I hope to finish them next year.

    Jelle, Jeffrey and Roel

    Annual Review 2018
    Wise Virgin with a Dove, copied by Jelle

    With so much work it was not surprising that I could not keep up with it all by myself. Hence my collaboration with my colleagues and Serge and Stide. Even then, we were not able to finish it all in time. Also, I had long thought about someone to pass the craft on to, someone who wanted to become a restoration sculptor. But how do you get someone who fits the bill? Fortunately Jelle came to visit. Exactly at the right time. He has now been working with me for more than six months, to the satisfaction of both of us and doing excellent work!

    Annual Review 2018
    Jeffrey helps presawing

    Then this summer I've had help from Jeffrey a few times, who came to help out with presawing on the machine, while at the same time my nephew Roel came by to begin to learn carving letters in stone.

    More flying buttress figurines

    After the first set of 26 flying buttress figurines from the north side of the Eusebius Church, we now had to make the 27 from the Southside.

    Annual Review 2018
    Roel learning to carve letters

    But fortunately from flying buttress no. 32 I had already made seven angels when he, plus a girl from buttress no. 36, and Stide had done one as well. Still we've been quite busy with the other 18, and we've not yet finished. Fortunately Jelle has now made a number of them as well. Anyway, on this blog you can read about Blind Man, Woman with Clubfoot, Wise Maiden with Cross, Foolish Maiden with Oil Can and Supreme Commander In Chief.

    Corbels for the Tower

    Since in March 2019 the Eusebius Church tower is scheduled to be completed, those sculptures had absolute priority. I've presawn some of the corbels and carved a set of them for the North- and south side of the tower, such as a Woman with Tulips, a Man with Bird, a Man with Ears of Corn, a Woman with two Doves, a Cat with Wings and an Bird beast. Sawing work was mostly done on the corbels from the west side of the tower (12 heads and 5 large corbels), but those were all carved by Stide. Time to once again visit to the scaffolds more to go…

    Read here the annual overview 2019.

No more messages to show.

No more messages to show.