Work on the tower of St. Eusebius's Church is nearing completion. Actually, the sculptres of The Day and The Night are the last two pieces that the builders are urgently waiting for. So I think a deep sigh of relief must have come from the scaffolds of the church when I completed The Night this week. For the tower, and part of the church, need to be free of scaffolding when a commemoration of the Battle of Arnhem is held this autumn, looking back to, 75 years ago. But this is not the only thing which still had to be done. I've been carving away for St. John's Cathedral in Den Bosch, for the the Utrecht cathedral, again for Saint John's Cathedral, and the flying buttress figurines for St. Eusebius' Church itself should be ready in time as well.
Day and Night
This corner sculpture is located at about 15 meters up and was originally carved in tufa by Eduard van Kuilenburg. She's part of a pair: there is a guy with a rooster, breaking his shackles and brandishing a mop (or should it represent a flaming torch?), and yes, this woman with a nest of owls too. The Day and The Night. This lascivious young lady is sitting with the left hand in her hair, on one knee, with a stick in her right hand. The purpose of the stick is not clear to me, or perhaps it should represent an extinguished candle. The owls represent nightlife, the rooster and the broken shackles stand for dawn. I suppose he's about to extinguish the torch and is not going to mop the floor, because he 's not carrying a bucket.
This relief is the biggest block from this church we received in the yard in recent years: almost 1 cubic metre. Due to time constraints we decided to use the copying saw, but the block was so large that it couldn't even turn around on the turntable of the machine. I had to literally cut a number of corners to make it fit. These were however just those corners that ultimately will be embedded inside the masonry, so you won't see anything of it later on. This presawing is saving me days of measuring work, by enabling me to start carving by eye from quite early on. Plus it saves me a lot of rough carving and sawing with an angle grinder, freeing me from a lot of the hard work. I glued two stainless steel threaded rods M16 into the top of the new block, onto which I can screw a eye bolt for lifting, making the block easy to move. It may come in handy on the scaffolds later on as well for the restoration masons.
The block of new Muschelkalk limestone of over 1800 kilos was provided by the Stonemasonry Firm, who also carved the profiles on it. Unfortunately, the stonemason in question was somewhat preactieve, which caused that I was short on material for the lady's toes. Added to that was that the original sculpture was a lady with a unique anatomy. Her knee was pointing straight forward, but her left foot was targeted towards the viewers at home. So I made a virtue of necessity and right away took the opportunity to give her left foot a somewhat more logical position. The right foot also missed a lot of stone, but I was still able to carve it nicely by putting it more back and in a bit flatter position. If you don't place the original right next to it, it will not stand out at all. It was an interesting challenge and I'm really pleased with how it turned out (See the slideshow below for pictures).
Nest of owls, finish
Near her right shoulder is an owl mother with her nest with two young. The chicks look endearing, with their surprised look.
I finished the entire sculpture with a wide tooth chisel, and then smoothened the body of the young lady with a coarse grater, leaving the chisel marks still barely visible, for a lively effect. Her hair and the owl's feathers I accented with the tooth chisel.
The sculpture of The Day was in a lot worse condition than The Night. The rooster and the man were both missing their heads , and the hand with the torch had disappeared as well. So I first needed to reconstruct those parts before I could start presawing. I modeled the neck and head of the rooster with plasticine and the hand was remade pretty quickly too. The tricky part was the position of the original hand, because in the only picture I had, the fingers were in an almost impossible position. But the head was more of a challenge. because this young man had quite a big head. I had glued a piece of hard PIR-foam onto his shoulders and from there I started looking for the right size, position and shape of the head.
I tried to see my progress by comparing my pictures with the original image. In the end Stide decided he would carve this one, so he has has been the one to make the finishing touches to the remodelling. See the gallery below for an impression.
Gallery -click on a thumbnail for the entire picture-
This was the last corbelstone from the Eusebius Tower.